Ridgid 14" Bandsaw Lower*/Upper Guide Support Fork B-56, 60 823745 823779

Description

Ridgid 14000, 14001, 14002 14" Bandsaw Upper Support Bracket B-56 Part # 823745
Item may come with thumb screws not set screws as shown.
* Note:Will work as B-60, (lower guide) but DOES NOT have a hole for the screw to attache the below table blade guard number (63), part number
823779
Shaft Measures .3175" (or about 3/8'') x .5875"-(about 9/16") x 1-3/4" long"
You may need to adjust the hex shaft your thrust bearing is on. To do this remove the set screw the micro-adjusting nut is on with a hex key. remove hes shaft. The bearing is mounted on a cam. Reinstall hex shaft so the bearing is farther away from guide fork and reinstall.
I sell many bandsaw parts write me with your needs if you can not find them here or below:
Repair Sheet and Parts list in PDF for 14002 emailed 2 you. Item #
152789827025
Lower blade guide:Item #
112243893475
Upper blade guide Bracket Item #
112458411734
Blade guide rub block fork Item #
1
52602074436
Upper Wheel tension Slide only  Item #
152829588313
Upper Wheel Hinge and Shaft Item # 152708355661
Complete Upper wheel tension assembly Item # 152602070912
Table trunnion support bracket
112458425276
Rub blocks for blade guide Item #
152480378450
Trunnion shoe clamps Item #
112577506256
Table Alignment Taper Pin Item #
152733386309
Ball Bearing Guide Upgrade Item #
112617014304
Door Catch Item #152778061716
Door Catch Stud & Knob Item # 152778067840
Upper Guide Post Complete w/Hardware Item # 152779261500
20% restocking fee on returns
All sales ship to address registered with Ebay at the time of the sale.